Reference Guide

1432 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
Parameters
Defaults
level
= 7; size = 40960 bytes
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost.
Increasing the buffer size does not affect messages stored in the buffer.
Related
Commands
logging console
c e s z
Specify which messages are logged to the console.
Syntax
logging console
[level]
To return to the default values, enter default logging console. To disable logging to
the console, enter
no logging console.
Parameters
Defaults
7 or debugging
Command Modes
CONFIGURATION
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings,
notifications, informational, or debugging.
Default: 7 or debugging.
size
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The
number of messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear the logging buffer.
default logging
buffered
Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.