Reference Guide

Simple Network Management Protocol and Syslog | 1433
Command
History
Related
Commands
logging facility
c e s z
Configure the Syslog facility, used for error messages sent to Syslog servers.
Syntax
logging facility
[facility-type]
To return to the default values, enter
no logging facility.
Parameters
Defaults
local7
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear logging buffer.
default logging console Returns the logging console parameters to the default setting.
show logging Display logging settings and system messages in the internal buffer.
facility-type
(OPTIONAL) Enter one of the following parameters.
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.