Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1431

1434 | Simple Network Management Protocol and Syslog

www.dell.com | support.dell.com

Command Modes

CONFIGURATION

Command

History

Commands

logging history

c e s z

Specify which messages are logged to the history table of the switch and the SNMP

network management station (if configured).

Syntax

logging history

level

To return to the default values, enter no logging history.

Parameters

Defaults

4 or warnings

Command Modes

CONFIGURATION

Command

History

Usage

Information

When you configure the snmp-server trap-source command, the system messages

logged to the history table are also sent to the SNMP network management station.

Commands

Version 8.3.19.0 Introduced on S4820T

Version 8.3.11.1 Introduced on Z9000

Version 8.3.7.0 Introduced on S4810

Version 7.6.1.0 Support added for S-Series

Version 7.5.1.0 Support added for C-Series

E-Series legacy command

logging Enable logging to a Syslog server.

logging on Enables logging.

level

Indicate a value from 0 to 7 or enter one of the following equivalent

words: emergencies, alerts, critical, errors, warnings, notifications,

informational, or debugging.

The default is 4.