Reference Guide

1436 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
Command
History
Related
Commands
logging on
c e s z
Specify that debug or error messages are asynchronously logged to multiple
destinations, such as logging buffer, Syslog server, or terminal lines.
Syntax logging on
To disable logging to logging buffer, Syslog server and terminal lines, enter no
logging on
.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you enter no logging on, messages are logged only to the console.
Related
Commands
logging source-interface
c e s z
Specify that the IP address of an interface is the source IP address of Syslog packets
sent to the Syslog server.
Syntax
logging source-interface
interface
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
default logging monitor Returns the logging monitor parameters to the default setting.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
logging Enable logging to Syslog server.
logging buffered Set the logging buffered parameters.
logging console Set the logging console parameters.
logging monitor Set the logging parameters for the terminal connections.