Reference Guide

144 | Control and Monitoring
www.dell.com | support.dell.com
flash: 520962048 bytes total (40189952 bytes free)
FTOS#
Usage
Information
Without the linecard or page option, the command output is continuous, use CNTL-z
to interrupt the command output.
The
save option works with other filtering commands. This allows you to save
specific information of a show command. The
save entry should always be the last
option.
For example: Force10#show tech-support |grep regular-expression |except
regular-expression | find regular-expression | save flash://result
This display output is an accumulation of the same information that is displayed
when you execute one of the following
show commands:
• show cam-profile
• show cam-ipv4flow
• show chassis
• show clock
• show environment
• show file-system
• show interface
• show inventory
• show ip management-route
• show ip protocols
• show ip route summary
• show processes cpu
• show processes memory
• show redundancy
• show rpm
• show running-conf
• show sfm
• show version
Related
Commands
show tech-support (S-Series)
s
Display a collection of data from other show commands, necessary for Dell Force10
technical support to perform troubleshooting on S-Series switches.
Syntax
show tech-support [stack-unit unit-id | page]
show version Display the FTOS version.
show linecard Display the line card(s) status.
show environment (C-Series
and E-Series)
Display
system component status.
show processes memory
(C-Series and E-Series)
Display memory usage based on running processes.