Reference Guide

Spanning Tree Protocol (STP) | 1469
show config
c e s
Display the current configuration for the mode. Only non-default values are
displayed.
Syntax
show config
Command Modes
SPANNING TREE
Command
History
Example
FTOS(config-stp)#show config
protocol spanning-tree 0
no disable
FTOS(config-stp)#
show spanning-tree 0
c e s
Display the Spanning Tree group configuration and status of interfaces in the
Spanning Tree group.
Syntax
show spanning-tree 0 [active | brief | guard | interface interface | root | summary]
Parameters
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
0
Enter 0 (zero) to display information about that specific Spanning Tree group.
active
(OPTIONAL) Enter the keyword active to display only active interfaces in
Spanning Tree group 0.
brief
(OPTIONAL) Enter the keyword brief to display a synopsis of the Spanning Tree
group configuration information.
guard
(OPTIONAL) Enter the keyword guard to display the type of guard enabled on
an STP interface and the current port state.