Reference Guide

1490 | System Time and Date
www.dell.com | support.dell.com
show ntp associations
c e s
Display the NTP master and peers.
Syntax show ntp associations
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ntp associations
remote ref clock st when poll reach delay offset disp
==========================================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
FTOS#
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Table 53-1. show ntp associations Command Fields
Field Description
(none) One or more of the following symbols could be displayed:
• * means synchronized to this peer
• # means almost synchronized to this peer
• + means the peer was selected for possible synchronization
• - means the peer is a candidate for selection
• ~ means the peer is statically configured
remote Displays the remote IP address of the NTP peer.
ref clock Displays the IP address of the remote peer’s reference clock.
st Displays the peer’s stratum, that is, the number of hops away from the external time
source. A 16 in this column means the NTP peer cannot reach the time source.
when Displays the last time the switch received an NTP packet.
poll Displays the polling interval (in seconds).
reach Displays the reachability to the peer (in octal bitstream).
delay Displays the time interval or delay for a packet to complete a round-trip to the NTP
time source (in milliseconds).