Reference Guide

Virtual Link Trunking (VLT) | 1521
Command
History
clear vlt statistics
Clear the statistics on VLT operations.
Syntax clear vlt statistics
Command Modes
EXEC
Command
History
Related
Commands
delay-restore
Configure the delay in bringing up VLT ports after reload or peer-link restoration
between the VLT peer switches.
Syntax
delay-restore
Parameters
Defaults
Not configured.
Command Modes
VLT DOMAIN
Command
History
Usage
Information
Use the delay-restore parameter to delay the system from bringing up the VLT port
for a brief period to allow IGMP Snooping and Layer 3 routing protocols to
converge. This feature can be used:
• after a VLT device is reloaded.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.8.0 Introduced on S4810
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on S4810
show vlt statistics Display statistics on VLT operations.
delay-restore
Enter the amount of time, in seconds, to delay bringing up the VLT ports after
the VLTi device is reloaded or after the peer-link is restored between VLT
peer switches.
Range: 1 to 1200.
Default: 90 seconds.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.12.0 Introduced on S4810