Reference Guide

1538 | Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
Defaults
zero (0) seconds
Command Modes
VRRP
Command
History
Usage
Information
If a switch is a MASTER and you change the hold timer, you must disable and
re-enable VRRP for the new hold timer value to take effect.
Related
Commands
preempt
c e s
Permit a BACKUP router with a higher priority value to preempt or become the
MASTER router.
Syntax
preempt
To prohibit preemption, enter no preempt.
Defaults
Enabled (that is, a BACKUP router can preempt the MASTER router).
Command Modes
VRRP
Command
History
priority
c e s
Specify a VRRP priority value for the VRRP group. This value is used by the VRRP
protocol during the MASTER election process.
Syntax
priority priority
To return to the default value, enter no priority.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
disable Disable a VRRP group.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series