Reference Guide

Virtual Router Redundancy Protocol (VRRP) | 1549
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show vrrp ipv6
------------------
GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net: fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9 (local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
vrid (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to view only
that group.
Range: 1 to 255.
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
E-Series Range: 1 to 255 for TeraScale
• For SONET interfaces, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN interface, enter the keyword
vlan followed by the VLAN ID. The
VLAN ID range is from 1 to 4094.
brief (OPTIONAL) Enter the keyword
brief to view a table of information on the VRRP
groups on the E-Series.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.10.0 Introduced on S4810
Version 8.3.2.0 Introduced
Table 58-3. Command Example Description: show vrrp ipv6
Line Beginning
with Description
GigabitEthernet... Displays the Interface, the VRRP group ID, and the network address.
If the interface is no sending VRRP packets,
0.0.0.0 appears as the network
address.
VRF VRF instance to which the interface (on which the VRRP group is configured)
belongs