Reference Guide

1550 | Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
vrrp-ipv6-group
e c s
Assign an interface to a VRRP group.
Syntax
vrrp-ipv6-group vrid
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
State: master... Displays the interface’s state:
• Na/If (not available),
•
master (MASTER virtual router)
•
backup (BACKUP virtual router)
the interface’s priority and the IP address of the MASTER.
Hold Down:... This line displays additional VRRP configuration information:
•
Hold Down displays the hold down timer interval in seconds.
•
Preempt displays TRUE if preempt is configured and FALSE if preempt
is not configured.
•
AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
•
Adv rcvd displays the number of VRRP advertisements received on the
interface.
•
Adv sent displays the number of VRRP advertisements sent on the
interface.
•
Bad pkts rcvd displays the number of invalid packets received on the
interface.
Virtual MAC address Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the interface is
connected.
Tracking states... Displays information on the tracked interfaces or objects configured for a
VRRP group (track command), including:
• UP or DOWN state of the tracked interface or object (
Up or Dn)
• Interface type and slot/port or object number, description, and time since
the last change in the state of the tracked object
• Cost to be subtracted from the VRRP group priority if the state of the
tracked interface/object goes DOWN
Table 58-3. Command Example Description: show vrrp ipv6
vrid Enter the virtual-router ID number of the VRRP group.
VRID range (C-Series and S-Series): 1-255.
VRID range (E-Series): 1-255 when VRF microcode is not loaded and 1-15 when
VRF microcode is loaded.