Reference Guide

S-Series Debugging and Diagnostics | 1555
Command Mode
EXEC Privilege
Command
History
H
Related
Commands
H
Usage
Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This is an automatic
process. A warning message appears when the
offline stack-unit command is
implemented.
Warning - Diagnostic execution will cause stack-unit to reboot after
completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
online stack-unit
s z
Place a stack unit in the online state.
Syntax
online
stack-unit number
Parameters
Defaults
None
Command Mode
EXEC Privilege
Command
History
H
Related
Commands
Version 8.3.11.1 Introduced on Z9000
Version 8.2.1.0 Added warning message to off-line diagnostic
Version 7.7.1.0 Introduced on S-Series
show environment
(S-Series)
View S-Series system component status (for example, temperature,
voltage).
number Enter the stack unit number.
S4810 range: 0 to 11
S4820T range: 0 to 11
Z9000 range: 0 to 7
Version 8.3.11.1 Introduced on Z9000
Version 7.7.1.0 Introduced on S-Series
show environment
(S-Series)
View S-Series system component status (for example, temperature,
voltage).