Reference Guide

S-Series Debugging and Diagnostics | 1557
Defaults
None
Command Mode
BUFFER PROFILE
Command
History
H
Related
Commands
buffer (Configuration)
c s
Apply a buffer profile to all Field or Switch Fabric processors in a port-pipe.
buffer [csf | fp-uplink] linecard slot port-set port-pipe buffer-policy buffer-profile
Parameters
None
Command Mode
BUFFER PROFILE
queue2 number Enter this keyword to allocate an amount of buffer space or packet
pointers to Queue 2.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
queue3
number Enter this keyword to allocate an amount of buffer space or packet
pointers to Queue 3.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
buffer-profile
(Configuration)
Create a buffer profile that can be applied to an interface.
csf
Enter this keyword to apply a buffer profile to all Switch Fabric
processors in a port-pipe.
fp-uplink
Enter this keyword to apply a buffer profile to all Field Processors in
a a port-pipe.
linecard slot
Enter the keyword linecard followed by the line card slot number.
port-set
port-pipe Enter the keyword port-set followed by the port-pipe number.
Range: 0-3 on C-Series, 0-1 on S-Series
buffer-policy
buffer-profile Enter the keyword buffer-policy followed by the name of a buffer
profile you created.