Reference Guide

1560 | S-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
None
Command Mode
INTERFACE
Command
History
Example FTOS#show buffer-profile summary fp-uplink
Linecard Port-set Buffer-profile
0 0 test1
4 0 test2
FTOS#
Related
Commands
show buffer-profile interface
c s
Display the buffer profile that is applied to an interface.
Syntax
show
buffer-profile {detail | summary} interface interface slot/port
Parameters
Defaults
None
Command Mode
INTERFACE
Command
History
H
Example
FTOS#show buffer-profile detail csf linecard 4 port-set 0
Linecard 4 Port-set 0
Buffer-profile test
Queue# Dedicated Buffer Buffer Packets
(Bytes)
0 36960 718
1 18560 358
2 18560 358
3 18560 358
4 9600 64
5 9600 64
6 9600 64
7 9600 63
FTOS#
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
buffer-profile
(Configuration)
Create a buffer profile that can be applied to an
interface.
detail
Display the buffer allocations of a buffer profile.
summary
Display the Field Processors and Switch Fabric Processors that are
applied to line card port-pipes in the system.
interface interface
Enter the keyword interface followed by the interface type, either
gigabitethernet or tengigabitethernet.
slot/port Enter the slot and port number of the interface.
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series