Reference Guide

1570 | S-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Defaults
No default behavior
Command Modes
EXEC Privilege
Command
History
Example
(layer2 counters)
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0 counters
---------------------------------------------------------------------------
EntryId Description #HITS
---------------------------------------------------------------------------
2048 STP BPDU Redirects 0
2047 LLDP BPDU Redirects 0
2045 LACP traffic Redirects 0
2044 GVRP traffic Redirects 0
2043 ARP Reply Redirects 0
2042 802.1x frames Redirects 0
2041 VRRP frames Redirects 0
2040 GRAT ARP 0
2039 DROP Cases 0
2038 OSPF1 STUB 0
2037 OSPF2 STUB 0
2036 VRRP STUB 0
2035 L2_DST_HIT+BC MAC+VLAN 4095 0
2034 L2_DST_HIT+BC MAC 0
2033 Catch all 0
384 OSPF[224.0.0.5] Packets 0
383 OSPF[224.0.0.6] Packets 0
382 VRRP Packets 0
380 BCast L2_DST_HIT on VLAN 4095 0
379 BCAST L2_DST_HIT Packets 0
4 Unknown L2MC Packets 0
3 L2DLF Packets 0
2 L2UCAST Packets 0
1 L2BCASTPackets 0
25
FTOS#
Example
(layer2
non-counters)
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0
############## FP Entry for redirecting STP BPDU to CPU Port ################
EID 2048: gid=1,
slice=15, slice_idx=0x00, prio=0x800, flags=0x82, Installed
tcam: color_indep=0, higig=0, higig_mask=0,
KEY=0x00000000 00000000 00000000 0180c200 00000000 00000000 00000000 , FPF4=0x00
MASK=0x00000000 00000000 00000000 ffffffff ffff0000 00000000 00000000 , 0x00
action={act=Drop, param0=0(0x00), param1=0(0x00)},
action={act=CosQCpuNew, param0=7(0x07), param1=0(0x00)},
action={act=CopyToCpu, param0=0(0x00), param1=0(0x00)},
action={act=UpdateCounter, param0=1(0x01), param1=0(0x00)},
meter=NULL,
counter={idx=0, mode=0x01, entries=1}
################ FP Entry for redirecting LLDP BPDU to RSM ################
EID 2047: gid=1,
stack-unit 0-7 Enter the keyword stack-unit followed by 0 to 7 to select a stack member ID.
port-set 0-1
[counters]
Enter the keyword
port-set with a port-pipe number — 0 or 1. The S25
models of the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword
counters to display hit counters for the
selected ACL or QoS option.
Version 7.8.1.0 Introduced on S-Series