Reference Guide

802.1ag | 159
Parameters
Defaults
None
Command Modes
INTERFACE
Command
History
ethernet cfm mip
s
Create a MIP.
Syntax
ethernet cfm mip
domain {name | level} ma-name name
Parameters
Defaults
None
Command Modes
INTERFACE
Command
History
mep cross-check
s
Enable cross-checking for a MEP.
[up-mep | down-mep] Specify whether the MEP is up or down facing.
Up-MEP: monitors the forwarding path internal to an bridge on the
customer or provider edge; on Dell Force10 systems the internal
forwarding path is effectively the switch fabric and forwarding
engine.
Down-MEP: monitors the forwarding path external another bridge.
domain [name | level] Enter this keyword followed by the domain name or domain level.
ma-name name Enter this keyword followed by the name of the maintenance
association.
mepid mep-id Enter an MEP ID.
Range: 1-8191
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.3.1.0 Introduced on S-Series
domain [name | level] Enter this keyword followed by the domain name or domain level.
ma-name name Enter this keyword followed by the name of the maintenance
association.
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.3.1.0 Introduced on S-Series