Reference Guide

802.1ag | 161
Command
History
ping ethernet
s
Send a Loopback message.
Syntax
ping ethernet domain
[name l level] ma-name m a-name remote {dest-mep-id | mac-addr
mac-address} source {src-mep-id | port interface}
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
show ethernet cfm domain
s
Display maintenance domain information.
Syntax
show ethernet cfm domain
[name | level | brief]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.3.1.0 Introduced on S-Series
name | level Enter the domain name or level.
ma-name ma-name
Enter the keyword followed by the maintenance association
name.
dest-mep-id
Enter the MEP ID that will be the target of the ping.
mac-addr mac-address Enter the keyword followed by the MAC address that will be
the target of the ping.
src-mep-id Enter the MEP ID that will originate the ping.
port interface Enter the keyword followed by the interface that will
originate the ping.
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810
Version 8.3.1.0 Introduced on S-Series
name | level Enter the maintenance domain name or level.
brief
Enter this keyword to display a summary output.