Reference Guide

176 | 802.1X
www.dell.com | support.dell.com
Command Modes
INTERFACE
Command
History
Usage
Information
To disable MAC authentication bypass on a port, enter the no dot1x
mac-auth-bypass command.
dot1x max-eap-req
c e s
Configure the maximum number of times an EAP (Extensive Authentication
Protocol) request is transmitted before the session times out.
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
Defaults
2
Command Modes
INTERFACE
Command
History
dot1x max-supplicants
c e
t
s
Restrict the number of supplicants that can be authenticated and permitted to access
the network through the port. This configuration is only takes effect in multi-auth
mode.
Syntax
dot1x max-supplicants number
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 8.4.1.0 Introduced on C-Series and S-Series
number Enter the number of times an EAP request is transmitted before a session
time-out.
Range: 1 to 10
Default: 2
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series