Reference Guide

178 | 802.1X
www.dell.com | support.dell.com
dot1x quiet-period
c e s
Set the number of seconds that the authenticator remains quiet after a failed
authentication with a client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
Defaults
60 seconds
Command Modes
INTERFACE
Command
History
dot1x reauthentication
c e s
Enable periodic re-authentication of the client.
Syntax
dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication
command.
Parameters
Defaults
3600 seconds (1 hour)
Command Modes
INTERFACE
Command
History
seconds Enter the number of seconds.
Range: 1 to 65535
Default: 60
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interval seconds
(Optional) Enter the keyword interval followed by the interval time, in
seconds, after which re-authentication will be initiated.
Range: 1 to 31536000 (1 year)
Default: 3600 (1 hour)
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810