Reference Guide

802.1X | 179
dot1x reauth-max
c e s
Configure the maximum number of times a port can re-authenticate before the port
becomes unauthorized.
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
Defaults
2
Command Modes
INTERFACE
Command
History
dot1x server-timeout
c e s
Configure the amount of time after which exchanges with the server time out.
Syntax
dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
number Enter the permitted number of re-authentications.
Range: 1 - 10
Default: 2
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant. Default: 30