Reference Guide

802.1X | 181
dot1x tx-period
c e s
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator
PAE.
Syntax
dot1x tx-period seconds
To return to the default, use the
no dot1x tx-period command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
show dot1x cos-mapping interface
c s
Display the CoS priority-mapping table provided by the RADIUS server and applied
to authenticated supplicants on an 802.1X-enabled port.
Syntax
show dot1x cos-mapping interface interface [mac-address mac-address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC privilege
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 65535
Default: 30
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface Enter one of the following keywords and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
mac-address (Optional) MAC address of an 802.1X-authenticated supplicant.