Reference Guide

182 | 802.1X
www.dell.com | support.dell.com
Command
History
Usage
Information
Enter a supplicant’s MAC address using the mac-address option to display CoS
mapping information only for the specified supplicant.
You can display the CoS mapping information applied to traffic from authenticated
supplicants on 802.1X-enabled ports that are in single-host, multi-host, and
multi-supplicant authentication modes.
Example
FTOS#show dot1x cos-mapping interface gigabitethernet 2/21
802.1p CoS re-map table on Gi 2/21:
----------------------------------
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
FTOS#show dot1x cos-mapping int g 2/21 mac-address 00:00:01:00:07:00
802.1p CoS re-map table on Gi 2/21:
----------------------------------
802.1p CoS re-map table for Supplicant: 00:00:01:00:07:00
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
show dot1x interface
c e s
Display the 802.1X configuration of an interface.
Syntax
show dot1x interface interface [mac-address mac-address]
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.12.0 Introduced on the S4810
Version 8.4.2.1 Introduced on the C-Series and S-Series