Reference Guide

Access Control Lists (ACL) | 261
Command Modes
ROUTE-MAP
Command
History
Related
Commands
match community
c e s
Configure a filter to match routes that have a certain COMMUNITY attribute in their
BGP path.
Syntax
match community community-list-name [exact]
Parameters
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
Related
Commands
match interface
c e s
Configure a filter to match routes whose next hop is on the interface specified.
Syntax
match interface interface
To remove a match, use the
no match interface interface command.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
set as-path Add information to the BGP AS_PATH attribute.
community-list-name
Enter the name of a configured community list.
exact
(OPTIONAL) Enter the keywords exact to process only those routes
with this community list name.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
ip community-list Configure an Community Access list.
set community Specify a COMMUNITY attribute.
neighbor send-community Send COMMUNITY attribute to peer or peer group.