Reference Guide

266 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
Related
Commands
match tag
c e s
Configure a filter to redistribute only routes that match a specified tag value.
Syntax
match tag tag-value
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
level-1
Enter the keyword level-1 to match IS-IS Level 1 routes.
level-2
Enter the keyword level-2 to match IS-IS Level 2 routes.
local
Enter the keyword local to match only on routes generated
within the switch.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
match interface Redistribute routes that match the next-hop interface.
match ip address Redistribute routes that match an IP address.
match ip next-hop Redistribute routes that match the next-hop IP address.
match ip route-source Redistribute routes that match routes advertised by other routers.
match metric Redistribute routes that match a specific metric.
match tag Redistribute routes that match a tag.
tag-value
Enter a value as the tag on which to match.
Range: zero (0) to 4294967295.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series