Reference Guide

Access Control Lists (ACL) | 271
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Related
Commands
set level
c e s
Configure a filter to specify the IS-IS level or OSPF area to which matched routes are
redistributed.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
Parameters
Defaults
Not configured.
no-export
Enter the keywords no-export to drop all routes containing the well-known
community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute must
not be advertised outside a BGP confederation boundary.
none
Enter the keywords none to remove the community attribute from routes
meeting the route map criteria.
additive
(OPTIONAL) Enter the keyword additive add the communities to already
existing communities.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
ip community-list Configure a Community access list.
match community Redistribute routes that match a BGP COMMUNITY attribute.
neighbor send-community Assign the COMMUNITY attribute.
show ip bgp community Display BGP community groups.
show ip community-lists Display configured Community access lists.
backbone
Enter the keyword backbone to redistribute matched routes to the OSPF
backbone area (area 0.0.0.0).
level-1
Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
level-1-2
Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and
Level 2.
level-2
Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2.
stub-area
Enter the keyword stub to redistributed matched routes to OSPF stub areas.