Reference Guide

272 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Command Modes
ROUTE-MAP
Command
History
Related
Commands
set local-preference
c e s
Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local
autonomous system.
Syntax
set local-preference value
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Usage
Information
The set local-preference command changes the LOCAL_PREF attribute for routes
meeting the route map criteria. To change the LOCAL_PREF for all routes, use the
bgp default local-preference command.
Related
Commands
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
set automatic-tag Compute the tag value of the route.
set metric Specify the metric value assigned to redistributed routes.
set metric-type Specify the metric type assigned to redistributed routes.
set tag Specify the tag assigned to redistributed routes.
value
Enter a number as the LOCAL_PREF attribute value.
Range: 0 to 4294967295
Version 8.3.19.0 Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
bgp default local-preference Change default LOCAL_PREF attribute for all routes.