Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

271

272

273

274

275

276

277

278

279

280

276 | Access Control Lists (ACL)

www.dell.com | support.dell.com

Command Modes

ROUTE-MAP

Command

History

Commands

set weight

c e s

Configure a filter to add a non-RFC compliant attribute to the BGP route to assist

with route selection.

Syntax

set weight weight

Parameters

Defaults

router-originated = 32768; all other routes = 0

Command Modes

ROUTE-MAP

Command

History

Usage

Information

If you do not use the set weight command, router-originated paths have a weight

attribute of 32768 and all other paths have a weight attribute of zero.

Version 8.3.19.0 Introduced on S4820T

Version 8.3.7.0 Introduced on S4810

Version 8.1.1.0 Introduced on E-Series ExaScale

Version 7.6.1.0 Support added for S-Series

Version 7.5.1.0 Support added for C-Series

pre-Version 6.1.1.0 Introduced for E-Series

set automatic-tag Compute the tag value of the route.

set level Specify the OSPF area for route redistribution.

set metric Specify the metric value assigned to redistributed routes.

set metric-type Specify the route type assigned to redistributed routes.

weight

Enter a number as the weight to be used by the route meeting the route map

specification.

Routes with a higher weight are preferred when there are multiple routes to the

same destination.

Range: 0 to 65535

Default: router-originated = 32768; all other routes = 0