Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 311
bgp asnotation asdot+
FTOS(conf)#router bgp 1
FTOS(conf-router_bgp)#bgp asnotation asplain
FTOS(conf-router_bgp)#ex
FTOS(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
FTOS(conf)#
bgp bestpath as-path ignore
c e s
Ignore the AS PATH in BGP best path calculations.
Syntax
bgp bestpath as-path ignore
To return to the default, enter
no bgp bestpath as-path ignore.
Defaults
Disabled (that is, the software considers the AS_PATH when choosing a route as
best).
Command Modes
ROUTER BGP
Usage
Information
If you enable this command, use the clear ip bgp * command to recompute the best
path.
Command
History
bgp bestpath as-path multipath-relax
z
Include prefixes received from different AS paths during multipath calculation.
Syntax
bgp bestpath as-path multipath-relax
To return to the default BGP routing process, enter no bgp bestpath as-path
multipath-relax
.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series