Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 313
To return to the default selection, use the no bgp bestpath med missing-as-best
command.
Defaults
Disabled
Command Modes
ROUTER BGP
Usage
Information
The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated as
0. During the path selection, paths with a lower MED are preferred over those with a
higher MED.
Command
History
bgp bestpath router-id ignore
c e s
Do not compare router-id information for external paths during best path selection.
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the no bgp bestpath router-id ignore command.
Defaults
Disabled
Command Modes
ROUTER BGP
Usage
Information
Configuring this option will retain the current best-path. When sessions are
subsequently reset, the oldest received path will be chosen as the best-path.
Command
History
bgp client-to-client reflection
c e s
Enables you to enable route reflection between clients in a cluster.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 6.3.1.0 Introduced
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced