Reference Guide

324 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Related
Commands
Command
History
Example
FTOS(conf-router_bgp)#no bgp regex-eval-optz-disable
FTOS(conf-router_bgp)#do show ip protocols
Routing Protocol is "ospf 22222"
Router ID is 2.2.2.2
Area Routing for Networks
51 10.10.10.0/00
Routing Protocol is "bgp 1"
Cluster Id is set to 10.10.10.0
Router Id is set to 10.10.10.0
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
FTOS(conf-router_bgp)#
bgp router-id
c e s
Assign a user-given ID to a BGP router.
Syntax
bgp router-id ip-address
To delete a user-assigned IP address, enter no bgp router-id.
Parameters
Defaults
The router ID is the highest IP address of the Loopback interface or, if no Loopback
interfaces are configured, the highest IP address of a physical interface on the router.
Command Modes
ROUTER BGP
Usage
Information
Peering sessions are reset when you change the router ID of a BGP router.
show ip protocols View information on all routing protocols enabled and active on the
E-Series.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced
ip-address
Enter an IP address in dotted decimal format to reset only that BGP neighbor.