Reference Guide

328 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
clear ip bgp peer-group
c e s
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp dampening
c e s
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
Command Modes
EXEC Privilege
Usage
Information
After you enter this command, the software deletes history routes and returns
suppressed routes to active state.
Command
History
peer-group-name
Enter the peer group name to reset the BGP sessions within that peer
group.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address mask
(OPTIONAL) Enter an IP address in dotted decimal format and the
prefix mask in slash format (/x) to clear dampening information only that
BGP neighbor.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series