Reference Guide

330 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
debug ip bgp
c e s
Display all information on BGP, including BGP events, keepalives, notifications, and
updates.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] [in | out]
To disable all BGP debugging, enter
no debug ip bgp.
Parameters
Command Modes
EXEC Privilege
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and
out parameters in the debugging command. The in and out parameters cancel each
other; for example, if you enter
debug ip bgp in and then enter debug ip bgp out, you
will not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for
BGP.
Related
Commands
Command
History
debug ip bgp dampening
c e s
Display information on routes being dampened.
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group
peer-group-name
Enter the keyword peer-group followed by the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
out
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
debug ip bgp events View information about BGP events.
debug ip bgp keepalives View information about BGP keepalives.
debug ip bgp notifications View information about BGP notifications.
debug ip bgp updates View information about BGP updates.
show debugging View enabled debugging operations.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series