Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 339
Command
History
neighbor advertisement-interval
c e s
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval seconds
To return to the default value, use the no neighbor {ip-address | peer-group-name}
advertisement-interval command.
Parameters
Defaults
seconds
= 5 seconds (internal peers); seconds = 30 seconds (external peers)
Command Modes
ROUTER BGP
Command
History
neighbor advertisement-start
c e s
Set the minimum interval before starting to send BGP routing updates.
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address} advertisement-start
command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group-name
Enter the name of the peer group to set the advertisement interval for all
routers in the peer group.
seconds
Enter a number as the time interval, in seconds, between BGP
advertisements.
Range: 0 to 600 seconds.
Default: 5 seconds for internal BGP peers; 30 seconds for external BGP
peers.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series