Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 369
Related
Commands
Command
History
show ip bgp cluster-list
c e s
View BGP neighbors in a specific cluster.
Syntax
show ip bgp [ipv4 unicast] cluster-list [cluster-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
FTOS#show ip bgp cluster-list
BGP table version is 64444683, local router ID is 120.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* I 10.10.10.1/32 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
*>I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination
network.
Table 9-1. show ip bgp Command Example Fields
Field Description
show ip bgp community View BGP communities.
neighbor maximum-prefix Control number of network prefixes received.
Version 8.3.19.0 Added the add-path option to the S4820T. Output on the S4820T shows
ADDPATH parameters.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Added the add-path option to the S4810. Output on the S4810 shows
ADDPATH parameters.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ipv4 unicast (OPTIONAL) Enter the ipv4 unicast keywords to view information only related
to ipv4 unicast routes.
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.