Reference Guide

372 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
The show ip bgp community command without any parameters lists BGP routes with
at least one BGP community attribute and the output is the same as for the show ip
bgp command output.
Command
History
show ip bgp community-list
c e s
View routes that are affected by a specific community list.
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name [exact-match]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
FTOS#show ip bgp community-list pass
BGP table version is 0, local router ID is 10.101.15.13
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Table 9-3.
Command Example Fields: show ip bgp community
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router.
If 0.0.0.0 is listed in this column, then local routes exist in the
routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight
Path Lists all the ASs the route passed through to reach the destination
network.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ipv4 unicast (OPTIONAL) Enter the ipv4 unicast keywords to view information
only related to ipv4 unicast routes.
community-list-name
Enter the name of a configured IP community list. (max 16 chars)
exact-match
Enter the keyword for an exact match of the communities.