Reference Guide

384 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Related
Commands
show ip bgp next-hop
c e s
View all next hops (via learned routes only) with current reachability and flap status.
This command only displays one path, even if the next hop is reachable by multiple
paths.
Syntax
show ip bgp next-hop
Command Modes
EXEC
EXEC Privilege
Example
FTOS>show ip bgp next-hop
Next-hop Via RefCount Cost Flaps Time Elapsed
63.114.8.33 63.114.8.33, Gi 12/22 240984 0 0 00:18:25
63.114.8.34 63.114.8.34, Gi 12/22 135152 0 0 00:18:13
63.114.8.35 63.114.8.35, Gi 12/22 1 0 0 00:18:07
63.114.8.60 63.114.8.60, Gi 12/22 135155 0 0 00:18:11
FTOS>
Prefix advertised Displays the number of network prefixes advertised, the
number rejected and the number withdrawn from the BGP
routing table.
Connections established Displays the number of TCP connections established and
dropped between the two peers to exchange BGP information.
Last reset Displays the amount of time since the peering session was last
reset. Also states if the peer resets the peering session.
If the peering session was never reset, the word never is
displayed.
Local host: Displays the peering address of the local router and the TCP
port number.
Foreign host: Displays the peering address of the neighbor and the TCP port
number.
Table 9-9. Command Example fields: show ip bgp neighbors
Lines beginning with Description
show ip bgp View the current BGP routing table.
Table 9-10. Command Example fields: show ip bgp next-hop
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.