Reference Guide

File Management |39
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Destination file name [test.cfg]: test1.cfg
Related
Commands
copy (Streamline Upgrade)
c e
Copy a system image to a local file and update the boot profile.
Syntax
copy source-url target-url [boot-image [synchronize-rpm [external]]]
Parameters
Defaults
No default behavior
Command Modes
CONFIGURATION
Command
History
Usage
Information
In this streamline copy command, the source image is copied to the primary RPM and
then, if specified, to the standby RPM. After the copy is complete, the new image file
path on each RPM is automatically configured as the primary image path for the next
boot. The current system image (the one from which the RPM booted) is
automatically configured as the secondary image path.
FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP.
cd Change working directory.
source-url
Enter the source file in url format. The source file is a valid Dell Force10
release image. Image validation is automatic.
target-url Enter the local target file in url format.
boot-image
Enter the keyword boot-image to designate this copy command as a
streamline update.
synchronize-rpm
Enter the keyword synchronize-rpm to copy the new image file to the peer
RPM
.
external
Enter the keyword external to designate the target device on the peer RPM
as external flash (instead of the default internal flash).
Default: Internal Flash
Version 8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
Version 7.5.1.0 Introduced on C-Series
Version 6.1.1.0 Introduced
Note: The keywords boot-image, synchronize-rpm, and external can be used on the
Primary RPM only.