Reference Guide

394 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command
History
show running-config bgp
c e s
Use this feature to display the current BGP configuration.
Syntax
show running-config bgp
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
timers bgp
c e s
Adjust BGP Keep Alive and Hold Time timers.
Syntax
timers bgp keepalive holdtime
To return to the default, enter no timers bgp.
Parameters
Defaults
No default values or behavior
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 8.3.19.0 Introduced on the S4820T
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
keepalive
Enter a number for the time interval, in seconds, between keepalive
messages sent to the neighbor routers.
Range: 1 to 65535
Default: 60 seconds
holdtime
Enter a number for the time interval, in seconds, between the last
keepalive message and declaring the router dead.
Range: 3 to 65535
Default: 180 seconds