Reference Guide

416 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
show ip bgp inconsistent-as
c e
t
s
View routes with inconsistent originating Autonomous System (AS) numbers, that is,
prefixes that are announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv4 multicast inconsistent-as
Command Modes
EXEC
EXEC Privilege
Command
History
show ip bgp ipv4 multicast neighbors
c e
t
s
Enables you to view the information exchanged by BGP neighbors.
Syntax
show ip bgp ipv4 multicast neighbors [ip-address [advertised-routes | dampened-routes
|
detail | flap-statistics | routes]]
Parameters
Command Modes
EXEC
EXEC Privilege
Example
FTOS#show ip bgp ipv4 multicast neighbors
BGP neighbor is 25.25.25.25, remote AS 6400, internal link
BGP version 4, remote router ID 25.25.25.25
BGP state ESTABLISHED, in this state for 00:02:18
Last read 00:00:16, hold time is 180, keepalive interval is 60 seconds
Received 1404 messages, 0 in queue
3 opens, 1 notifications, 1394 updates
6 keepalives, 0 route refresh requests
Sent 48 messages, 0 in queue
3 opens, 2 notifications, 0 updates
43 keepalives, 0 route refresh requests
Minimum time between advertisement runs is 5 seconds
Minimum time before advertisements start is 0 seconds
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address
(OPTIONAL) Enter the IP address, in either IPv4 or IPv6 format, of the
neighbor to view only BGP information exchanged with that neighbor.
advertised-routes
(OPTIONAL) Enter the keywords advertised-routes to view only the
routes the neighbor sent.
dampened-routes
(OPTIONAL) Enter the keyword dampened-routes to view information
on dampened routes from the BGP neighbor.
detail
(OPTIONAL) Display detailed neighbor information.
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to view flap statistics on
the neighbor’s routes.
routes
(OPTIONAL) Enter the keywords routes to view only the neighbor’s
feasible routes.