Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 419
show ip bgp peer-group
c e
t
s
Enables you to view information on the BGP peers in a peer group.
Syntax
show ip bgp ipv4 multicast peer-group [peer-group-name [detail | summary]]
Parameters
Command Modes
EXEC
EXEC Privilege
Related
Commands
Command
History
show ip bgp summary
c e
t
s
Enables you to view the status of all BGP connections.
Syntax
show ip bgp ipv4 multicast summary
Command Modes
EXEC
EXEC Privilege
Example
FTOS#sho ip bgp ipv4 multicast summary
BGP router identifier 100.10.10.1, local AS number 6400
BGP table version is 14, main routing table version 14
7 network entrie(s) and 7 paths using 972 bytes of memory
2 BGP path attribute entrie(s) using 112 bytes of memory
1 BGP AS-PATH entrie(s) using 35 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
25.25.25.25 6400 21 9 14 0 0 00:02:04 3
211.1.1.129 640 28 6 0 0 0 00:00:21 Active
FTOS#
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
detail
(OPTIONAL) Enter the keyword detail to view detailed status
information of the peers in that peer group.
summary
(OPTIONAL) Enter the keyword summary to view status information of
the peers in that peer group.
The output is the same as that found in show ip bgp summary command
neighbor peer-group (assigning peers) Assign peer to a peer-group.
neighbor peer-group (creating group) Create a peer group.
show ip bgp peer-group View information on the BGP peers in a peer group.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
Version 7.5.1.0 Modified: added
detail option