Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 423
Command
History
description
c e s
Use this feature to designate a meaningful description to the extended community.
Syntax
description {line}
To remove the description, use the
no description {line} command.
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION (conf-ext-community-list)
Command
History
ip extcommunity-list
c e s
Use this feature to enter the Extended Community-list mode.
Syntax
ip extcommunity-list word
To exit from this mode, use the exit command.
Parameters
Defaults
No defaults values or behavior
Command Modes
CONFIGURATION (conf-ext-community-list)
Usage
Information
This new mode will change the prompt. the example below.
Example
FTOS(conf)#ip extcommunity-list test
FTOS(conf-ext-community-list)#
Command
History
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
line
Enter a description (maximum 80 characters).
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
word
Enter a community list name (maximum 16 characters).
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series