Reference Guide

426 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Parameters
Defaults
No default values or behavior
Command Modes
ROUTE MAP (config-route-map)
Usage
Information
If the set community rt and soo are in the same route-map entry, we can define the
behavior as:
• If
rt option comes before soo, with or without additive option, then soo overrides
the communities set by
rt
• If rt options comes after soo, without the additive option, then rt overrides the
communities set by
soo
• If rt with additive option comes after soo, then rt adds the communities set by soo
Related
Commands
Command
History
set extcommunity soo
c e s
Use this feature to set extended community site-of-origin in Route Map.
Syntax
set extcommunity soo {as4 ASN4:NN | ASN:NNNN | IPADDR:NN [non-trans]}
To delete the site-of-origin community, use the
no set extcommunity command.
Parameters
as4 ASN4:NN
Enter the keyword as4 followed by the 4-octet AS specific extended
community number in the format ASN4:NN (4-byte AS number:2-byte
community value)
.
ASN:NNNN
Enter the 2-octet AS specific extended community number in the format
ASN:NNNN (2-byte AS number:4-byte community value)
.
IPADDR:NN
Enter the IP address specific extended community in the format
IPADDR:NN (4-byte IPv4 Unicast Address:2-byte community value)
additive
(OPTIONAL) Enter the keyword additive to add to the existing extended
community.
non-trans
(OPTIONAL) Enter the keyword non-trans to indicate a non-transitive BGP
extended community.
set extcommunity soo Set extended community site-of-origin in route-map.
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
as4 ASN4:NN
Enter the keyword as4 followed by the 4-octet AS specific extended
community number in the format ASN4:NN (4-byte AS number:2-byte
community value)
.
ASN:NNNN
Enter the 2-octet AS specific extended community number in the format
ASN:NNNN (2-byte AS number:4-byte community value)
.