Reference Guide

428 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the
value divided into 2-byte and 4-byte values in decimal format. This format is
consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value
0x20 00 00 00 10 00, it will be displayed as:
0x0405:8192:4096
Non-transitive extended communities are marked with an asterisk, as shown in the
figure below.
Example
FTOS#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100, Weight 0, external
Communities :
300:400 500:600
Extended Communities :
RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:37:50529044
SoO:38:50529045 SoO:0.0.0.2:33 SoO:506.62106:34 0x0303:254:11223*
FTOS#
Command
History
show ip bgp paths extcommunity
c e s
Use this feature to display all BGP paths having extended community attributes.
Syntax
show ip bgp paths extcommunity
Command Modes
EXEC
EXEC Privilege
Example
FTOS#show ip bgp paths extcommunity
Total 1 Extended Communities
Address Hash Refcount Extended Community
0x41d57024 12272 1 RT:7:200 SoO:5:300 SoO:0.0.0.3:1285
FTOS#
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series