Reference Guide

Content Addressable Memory (CAM) | 439
cam-optimization
c s
Optimize CAM utilization for QoS Entries by minimizing require policy-map CAM
space.
Syntax
cam-optimization [qos]
Parameters
Command Modes
CONFIGURATION
Defaults
Disabled
Command
History
Usage
Information
When this command is enabled, if a Policy Map containing classification rules (ACL
and/or dscp/ip-precedence rules) is applied to more than one physical interface on the
same port pipe, only a single copy of the policy will be written (only 1 FP entry will
be used).
Note that an ACL itself may still require more that a single FP entry, regardless of the
number of interfaces. Refer to IP Access Control Lists, Prefix Lists, and
Route-map in the FTOS Configuration Guide for complete discussion.
cam-profile (Config)
e
Set the default CAM profile and the required microcode.
Syntax
cam-profile profile
microcode microcode
qos
Optimize CAM usage for Quality of Service (QoS)
Version 8.2.1.0 Introduced on the S-Series
Version 7.8.1.0 Introduced on the C-Series and S-Series