Reference Guide

444 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
If the CAM profile has been changed, this command displays the current CAM
profile setting in one column and in the other column displays the CAM profile and
the microcode that will be configured for the chassis and all online line cards after the
next reboot.
profile
(OPTIONAL) Choose a single CAM profile to display:
• Enter the keyword
default to specify the default CAM profile.
• Enter the keyword
eg-default to specify the default CAM profile for EG
(dual-CAM) line cards.
• Enter the keyword
ipv4-320k to specify the CAM profile that provides 320K
entries for the IPv4 Forwarding Information Base (FIB).
• Enter the keyword
ipv4-egacl-16k to specify the CAM profile that provides
16K entries for egress ACLs.
• Enter the keyword
ipv6-extacl to specify the CAM profile that provides IPv6
functionality.
• Enter the keyword
l2-ipv4-inacl to specify the CAM profile that provides 32K
entries for ingress ACLs.
• Enter the keyword
unified-default to specify the CAM profile that maintains
the CAM allocations for the IPv6 and IPv4 FIB while allocating more CAM
space for the Ingress and Egress Layer 2 ACL, and IPv4 ACL regions.
• Enter the keyword
ipv4-vrf to specify the CAM profile that maintains the
CAM allocations for the IPv4 FIB while allocating CAM space for VRF.
• Enter the keyword
ipv4-v6-vrf to specify the CAM profile that maintains the
CAM allocations for the IPv4 and IPv6FIB while allocating CAM space for
VRF.
microcode
microcode
Choose the microcode to display. Not all microcodes are available to be paired
with a CAM profile.
• Enter the keyword
default to select the microcode that distributes CAM space
for a typical deployment.
• Enter the keyword
lag-hash-align to select the microcode for applications that
require the same hashing for bi-directional traffic.
• Enter the keyword
lag-hash-mpls to select the microcode for hashing based
on MPLS labels (up to five labels deep).
• Enter the keyword
ipv6-extacl to select the microcode for IPv6.
• Enter the keyword
acl-group to select the microcode for applications that
need 16k egress IPv4 ACLs.
• Enter the keyword
ipv4-vrf to select the microcode for IPv4 VRF applications.
• Enter the keyword
ipv4-v6-vrf to select the microcode forIPv4 and IPv6 VRF
applications.
• Enter the keyword
ipv4-64k-ipv6 to specify the CAM profile that provides an
alternate to ipv6-extacl that redistributes CAM space from the IPv4FIB to
IPv4Flow and IPv6FIB.
summary (OPTIONAL) Enter this keyword to view a summary listing of the CAM profile
and microcode on the chassis and all line cards.
Version 8.2.1.0 Added support for ipv4-64k-ipv6 profile
Version 7.9.1.0 Added support for VRF protocols.
Version 6.3.1.0 Introduced on E-Series