Reference Guide

452 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
FTOS#show cam-ipv4flow
-- Chassis Cam Ipv4Flow --
Current Settings Next Boot
Acl : 8K 5K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 2 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 8 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 13 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
FTOS#
Usage
Information
If the IPv4Flow sub-region has been changed, this command displays the current
IPv4Flow configuration in one column and in the other column displays the
IPv4Flow configuration that will be loaded after the next reboot.
Related
Commands
CAM Layer 2 ACL Commands
IPv4Flow sub-partitions are supported on the E-Series TeraScale platform e
t
The CAM Layer 2 ACL commands are:
• cam l2acl (EXEC Privilege)
• cam-l2acl (CONFIGURATION)
• show cam-l2acl
cam-ipv4flow
(CONFIGURATION)
Configure the amount of CAM space in IPv4flow sub-regions.