Reference Guide

454 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Usage
Information
The PVST sub-partition requires a minimum number of entries when employing
PVST+. the CAM chapter of the FTOS Configuration Guide for the E-Series.
Related
Commands
show cam-l2acl
e
t
Display the percentage of the Layer 2 ACL CAM partition that is allocated to each
Layer 2 ACL CAM sub-partition. If configuration has changed, the command
displays the current configuration and the configuration that FTOS will write to the
CAM after the next chassis reboot.
Syntax show cam-l2acl
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show cam-l2acl
-- Chassis Cam L2-ACL --
Current Settings(in percent)
Sysflow : 6
L2Acl : 14
Pvst : 50
Qos : 12
L2pt : 13
Frrp : 5
-- Line card 1 --
Current Settings(in percent)
Sysflow : 6
L2Acl : 14
pvst percentage
Allocate a percentage of the Layer 2 ACL CAM space for PVST+
entries. Enter the keyword
pvst and specify the percentage.
Range: 5 to 95
qos percentage Allocate a percentage of the Layer 2 ACL CAM space for QoS
entries. Enter the keyword
qos and specify the percentage.
Range: 5 to 95
l2pt percentage
Allocate a percentage of the Layer 2 ACL CAM space for L2PT
entries. Enter the keyword
l2pt and specify the percentage.
Range: 5 to 95
frrp percentage
Allocate a percentage of the Layer 2 ACL CAM space for FRRP
entries. Enter the keyword
frrp and specify a percentage.
Range: 5 to 95
Version 7.7.1.0 Introduced on E-Series
show cam-l2acl
Display the percentage of the Layer 2 ACL CAM partition that is allocated to
each Layer 2 ACL CAM sub-partition.
Version 7.7.1.0 Introduced on E-Series