Reference Guide

Control Plane Policing (CoPP) | 457
12
Control Plane Policing (CoPP)
Overview
The CoPP commands are supported on the Dell Force10 and Z
Z-Series platforms as indicated by the characters that appear under each of the
command headings.
Commands
• control-plane-cpuqos
• service-policy rate-limit-cpu-queues
• service-policy rate-limit-protocols
• show cpu-queue rate cp
• show ip protocol-queue-mapping
• show ipv6 protocol-queue-mapping
• show mac protocol-queue-mapping
control-plane-cpuqos
Enter control-plane mode and configure the switch to manage control-plane traffic.
Syntax control-plane-cpuqos
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Version 8.3.19.0 Introduced on S4820T
Version 8.3.8.0 Introduced on S4810