Reference Guide

458 | Control Plane Policing (CoPP)
www.dell.com | support.dell.com
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
Syntax service-policy rate-limit-cpu-queues policy-name
Parameters
Defaults
Not configured.
Command Modes
CONTROL-PLANE-CPUQOS
Command
History
Usage
Information
A policy-map must be created by associating a queue number with the qos-policy.
The QoS policies must be created prior to enabling this command.
Related
Commands
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
Syntax service-policy rate-limit-protocols policy-name
Parameters
Defaults
Not configured.
Command Modes
CONTROL-PLANE-CPUQOS
Command
History
Usage
Information
This command applies the service-policy based on the type of protocol defined in the
ACL rules.
The ACL and QoS policies must be created prior to enabling this command.
policy-name Enter the service-policy name, in a string up to 140 characters.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.8.0 Introduced on S4810
qos-policy-input Create a QoS input policy map.
class-map Create a QoS class map.
policy-map-input Create an input policy map.
policy-name Enter the service-policy name, in a string up to 140 characters.
Version 8.3.19.0 Introduced on S4820T
Version 8.3.8.0 Introduced on S4810