Reference Guide

468 | Data Center Bridging
www.dell.com | support.dell.com
Syntax
clear ets counters port-type slot/port
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax
clear pfc counters [port-type slot/port | stack-unit {unit number | all } all stack-ports all}]]
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
dcb-enable
Enable Data Center Bridging.
Syntax
dcb enable
To disable DCB, use the no dcb enable command.
Defaults
none
Command Modes
CONFIGURATION
port-type Enter the keyword port-type followed by the slot/port information.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module
port-type Enter the keyword port-type followed by the slot/port information.
stack-unit unit
number
Enter the keyword stack-unit followed by the stack-unit number to be cleared.
all stack-ports all Enter the keyword all stack-ports all to clear the counters on all interfaces.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module